Automatic Loading Robotic arm for the Membrane press Machine-MD8-90-F-V

Product Features:

★ The automatic loading robotic arm of this equipment can be customized according to the specific needs of the customers.
★ This equipment can meet the automation production requirements of one mold with one cavity or one mold with multiple cavities.
★ The automatic loading robotic arm is equipped with a vision system for real-time automatic inspection of the upper and lower mold surfaces (appearance) and lens surfaces (appearance).

Specification Parameters:

NO	Project distinction	Content	Detailed specifications
1	Basic parameters	power source	Power supply: single-phase 220V; rated power: 2KW;
		power source	Compressed air: 0.55MPa±5%, 55 liters/min;
		Mold specification	Diameter φ 16 ~ φ 90mm ; Square: 85mm×85mm The allowable height range of the total height of the upper and lower mold cores (including the preform): 22mm~68mm Scope of application: one cavity for one mold, multiple cavities for one mold
		Dimensions	2100(L)×1300(W)×2150(H) ; Approx. weight: 1350kg
3	drive mode	High precision electric cylinder cylinder	High-precision electric cylinder and SMC cylinder
4	Processing cycle	around 60s	Depending on the processing model
5	Tray capacity	Finished tray size	One layer; it depends on the processing model
		Dimensions of the preform tray	One round layer; it depends on the processing model
		Specification and size of defective product tray	It depends on the processing machine
6	Air purification	FFU fan unit	Realize the air repurification of the small environment of the equipment
7	visual system	vision	Monitor the cosmetic condition of molds and lenses
8	Mold, lens and preform transfer	transfer	Transfer of molds, lenses and preforms using pneumatic cylinders, pneumatic fingers, electric cylinders, error correctors and through-beam photoelectric sensors
9	Environmental requirements	humidity	30-60% , but no condensation
9	Environmental requirements	temperature	Normal temperature 20-28°C, but no condensation